Study on practical application of fluororesin powder coating (part 1): Evaluation of basic physical properties and weatherability

被引：0

作者：

Okuda A. ^{[1
]}

Saitoh S. ^{[2
]}

Goto Y. ^{[3
]}

机构：

[1] Construction System and Materials Dept., Technical Research Institute, Obayashi Corporation

[2] Matsubushi Factory, Marushin Co.

来源：

AIJ Journal of Technology and Design | 2021年 / 27卷 / 65期

关键词：

Accelerated weather resistance test; Fluororesin coating; Outdoor exposure test; Powder coating; Weatherability;

D O I：

10.3130/AIJT.27.42

中图分类号：

学科分类号：

摘要：

Basic physical properties and weatherability were evaluated in order to evaluate the practicality of the fluororesin powder coating. As a result, the basic physical properties of various powder coatings were almost the same as those of solvent-based fluororesin coatings (PVDF). As a result of the accelerated weather resistance test and outdoor exposure test in Okinawa, a difference in weatherability was observed depending on the type of powder coating, and a fluororesin powder coating with the same performance as PVDF was confirmed. One of the causes of deterioration of the powder coating was presumed to be photocatalytic reaction. © 2021 Architectural Institute of Japan. All rights reserved.

引用

页码：42 / 47

页数：5

共 49 条

[1] 15 YEARS EXPERIENCE IN POWDER COATING MANUFACTURING AND PRACTICAL APPLICATION: PART 1.
Bodnar, E.
Taylor, Paul
1600, (39):
[2] The Norwegian Earth System Model, NorESM1-M - Part 1: Description and basic evaluation of the physical climate
Bentsen, M.
Bethke, I.
Debernard, J. B.
Iversen, T.
Kirkevag, A.
Seland, O.
Drange, H.
Roelandt, C.
Seierstad, I. A.
Hoose, C.
Kristjansson, J. E.
GEOSCIENTIFIC MODEL DEVELOPMENT, 2013, 6 (03) : 687 - 720
[3] Effects of Surface Coating Materials on The Physical and Mechanical Properties of Particleboard Used For Kitchen Cabinets and Surface Quality Properties: Part 1. Effects of Physical Properties
Özdemir, Turgay
Kalaycioğlu, Hülya
Malkoçoğlu, Abdulkadir
Nemli, Gökay
Turkish Journal of Agriculture and Forestry, 1999, 23 (EK4): : 969 - 976
[4] STUDY ON PHYSICAL-CHEMICAL PROPERTIES OF FURNACE-NICKEL-SLAG POWDER FOR GEOPOLYMER APPLICATION
Samnur, S.
Husain, H.
Zulfi, A.
Sujiono, E. H.
JURNAL PENDIDIKAN FISIKA INDONESIA-INDONESIAN JOURNAL OF PHYSICS EDUCATION, 2016, 12 (02): : 177 - 182
[5] 2014 iAREA campaign on aerosol in Spitsbergen - Part 1: Study of physical and chemical properties
Lisok, J.
Markowicz, K. M.
Ritter, C.
Makuch, P.
Petelski, T.
Chilinski, M.
Kaminski, J. W.
Becagli, S.
Traversi, R.
Udisti, R.
Rozwadowska, A.
Jefimow, M.
Markuszewski, P.
Neuber, R.
Pakszys, P.
Stachlewska, I. S.
Struzewska, J.
Zielinski, T.
ATMOSPHERIC ENVIRONMENT, 2016, 140 : 150 - 166
[6] A BASIC STUDY OF THE AR SIMULATOR FOR DESIGN PANELS (PART 1): PRODUCTION OF THE SYSTEM AND EVALUATION OF USE VALUE
Mabuchi D.
Kaneko K.
AIJ Journal of Technology and Design, 2023, 29 (73) : 1454 - 1459
[7] Physical properties of root cementum:: Part 1.: A new method for 3-dimensional evaluation
Malek, S
Darendeliler, MA
Swaín, MV
AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS, 2001, 120 (02) : 198 - 208
[8] Computation-Experimental Evaluation of the Density and Adhesion Strength of Powder Coatings Applied by the Electrocontact Method. Part 1. Coating Compaction
Lopata, L. A.
Kulyzhskyi, V. M.
Lopata, O. V.
Smirnov, I. V.
STRENGTH OF MATERIALS, 2023, 55 (04) : 759 - 768
[9] Computation-Experimental Evaluation of the Density and Adhesion Strength of Powder Coatings Applied by the Electrocontact Method. Part 1. Coating Compaction
L. A. Lopata
V. M. Kulyzhskyi
O. V. Lopata
I. V. Smirnov
Strength of Materials, 2023, 55 : 759 - 768
[10] Porous Permeable Corundum Ceramic Based on Aluminum Powder. Part 1. Study of Different Grades of Aluminum Hydroxide Powder Properties
B. L. Krasnyi
V. P. Tarasovskii
Yu. M. Mosin
A. B. Krasnyi
A. Yu. Omarov
Refractories and Industrial Ceramics, 2014, 55 : 30 - 35

← 1 2 3 4 5 →