Dynamic instability mechanism of support and its control in longwall mining of steeply dipping coal seam

被引：0
|
作者：
Xie P. [1 ,2 ]
Wu S. [1 ,2 ]
Luo S. [2 ,3 ]
Wu Y. [1 ,2 ]
Chen J. [4 ]
机构：
[1] School of Energy Engineering, Xi'an University of Science and Technology, Xi'an
[2] Key Laboratory of Western Mine Exploitation and Hazard Prevention Ministry of Education, Xi'an University of Science and Technology, Xi'an
[3] Department of Mechanics, Xi'an University of Science and Technology, Xi'an
[4] Xinjiang Coking Coal Group Corporation Limited, Urumqi
来源：
Meitan Kexue Jishu/Coal Science and Technology (Peking) | 2023年 / 51卷 / 02期
关键词：
dynamical equations; high catting full-mechanized mining; stability control; steeply dipping seam; support dynamics instability;
D O I：
10.13199/j.cnki.cst.2022-1746
中图分类号：
学科分类号：
摘要：
Stability control of supports under dynamic load is one of the challenges of mining steeply dipping seam. The research object is to study the dynamic load destabilisation mechanism of the support for high cutting and steeply dipping mining working face by using field measurement, physical simulation, theoretical analysis and numerical simulation. The characteristics of typical dynamic loads on hard roof working face with thigh cutting and steeply dipping mining working face are summarized, and the destabilization mechanism of the support under the action of multi-dimensional dynamic loads is analyzed. The results show that when the periodic weighting, the high cutting and steeply dipping mining working face is easy to produce the incoming pressure dynamic load on the top beam or caving shield, when the top plate collapses, it is easy to produce the positive pressure impact type dynamic load and back push impact type dynamic load, and the collapsed gangue slip and roll is easy to cause the inter-frame (side push) dynamic load. The kinetic equations of the basic modes of motion of the support sliding and rotating and their coupling states under different influencing factors are given, and it is concluded that the support rotation (tilting tendency) and the inter-frame force increase with the decrease of the normal load of the roof plate, the increase of the tangential load of the roof plate, the increase of the degree of deflection of the roof plate and the increase of the mining height.Numerical simulation shows that under the action of positive pressure impact, the support rear column is more loaded than the front column; under the action of rear push, the bottom of the column is more loaded than the middle and upper part; when the action between frames, the upper column in the same support is more loaded than the lower part, and the upper bracket between brackets is more loaded than the lower bracket, and all have obvious asymmetric loading characteristics. Based on the findings of the study, measures such as weakening the hard top plate by overrunning periodic blasting, reducing the specific pressure of the bottom plate, installing additional bi-directional lateral pushing devices and using touch top with pressure to move the support were proposed to effectively reduce the impact of dynamic load on the stability of the support. © 2023 Coal Science and Technology. All rights reserved.
引用
收藏
页码：58 / 71
页数：13
相关论文
共 29 条
  • [1] YANG Ke, LIU Wenjie, LI Zhihua, Et al., Catastrophemechanism and prevention and control technology of soft coal mining with large inclination angle under thick and hard roof, Coal Science and Technology, 49, 2, pp. 12-20, (2021)
  • [2] WU Yongping, YUN Dongfeng, XIE Panshi, Et al., Progress, practice and scientific issues in steeply dipping coal seams fully-mechanized mining, Journal of China Coal Society, 45, 1, pp. 24-34, (2020)
  • [3] GUO Jingang, Мiao Xiexing, YANG Renshun, Et al., Comment on dynamic load acting on support, Ground Pressure and Strata Control, 3, 4, pp. 72-75, (1995)
  • [4] XIE Panshi, WU Yongping, ZHANG Hao, Et al., Changeful load analysis of supports in large mining height fully-mechanized face of steeply dipping seam, Coal Science and Technology, 44, 4, pp. 101-105, (2016)
  • [5] XIE Panshi, WU Yongping, LUO Shenghu, Et al., Structural evolution of ladder roof and its stability analyses for a fully-mechanized working face with a large mining height in steeply inclined coal seam, Journal of Мining & Safety Engineering, 35, 5, pp. 1611-1618, (2018)
  • [6] ZHANG Zhiyan, Dynamic analysis on stability of hydraulic powered support in deep inclined fully mechanized wall and prevention slips measures, Journal of China Coal Society, 32, 7, pp. 705-709, (2007)
  • [7] WANG Hongwei, WU Yongping, XIE Panshi, Et al., Research on strata movement and support stability of fully mechanized sub-level caving workface with variable angle in steeply dipping seam, Journal of China University of Мining & Technology, 46, 3, pp. 507-513, (2017)
  • [8] ZHANG Dongsheng, WU Xin, ZHANG Wei, Et al., Stability analysis on support in large inclined coal face during special mining period, Journal of Мining & Safety Engineering, 30, 3, pp. 331-336, (2013)
  • [9] YANG Chaofeng, LI Zhiyong, ZHANG Xuhe, Analysis on mechanism of hydraulic support stability in large inclined angle mining face, Coal Science and Technology, 41, 7, pp. 47-50, (2013)
  • [10] XIE Panshi, QU Lili, WU Yongping, Roof breaking mechanism of longwall stope with steeply dipping contugous coal seam group, Coal Science and Technology, 50, 2, pp. 65-74, (2022)
123