Corrosion behavior and mechanical properties of V-4Cr-4Ti alloy exposed at 500 and 700 ° C to static Pb with-10-9 mass% dissolved oxygen for 1000 h

被引：1

作者：

Tsisar, Valentyn ^{[1
,2
,3
]}

Nagasaka, Takuya ^{[2
]}

Yeliseyeva, Olga ^{[4
]}

Lim, Jun ^{[3
]}

Konys, Jurgen ^{[1
]}

Muroga, Takeo ^{[2
]}

Schroer, Carsten ^{[1
]}

机构：

[1] Karlsruhe Inst Technol KIT, Inst Appl Mat Appl Mat Phys IAM AWP, Hermann von Helmholtz Pl 1, D-76344 Eggenstein Leopoldshafen, Germany

[2] Natl Inst Fus Sci NIFS, Fus Syst Res Div, Oroshi 322-6, Toki 5095292, Japan

[3] Belgian Nucl Res Ctr SCK CEN, Boeretang 200, B-2400 Mol, Belgium

[4] Natl Acad Sci Ukraine, Phys Mech Inst, 5 Naukova St, UA-79601 Lvov, Ukraine

来源：

JOURNAL OF NUCLEAR MATERIALS | 2024年 / 595卷

关键词：

V; -alloy; Liquid Pb; Corrosion; VANADIUM ALLOYS; PRECIPITATION BEHAVIOR; LIQUID; COMPATIBILITY; IMPURITIES; METALS;

D O I：

10.1016/j.jnucmat.2024.155052

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The corrosion tests of V-4Ti-4Cr alloy (NIFS HEAT 2) tensile samples were carried out in static liquid Pb with -10 -9 mass% dissolved oxygen at 500 and 700 degrees C for 1000 h. A clear intergranular corrosion attack was observed on the surface of the samples. Corrosion losses increase ten times, from around 3.0 mu m to 30 mu m, as the temperature increased from 500 degrees C to 700 degrees C, respectively. The alloy remained ductile after the tests at both temperatures. A phenomenology of interaction processes in Pb[O]-V[Cr,Ti] system is discussed.

引用

页数：8

共 5 条

[1] Mechanical properties of V-4Cr-4Ti after exposure in static lithium at 650°C
The Graduate University for Advanced Studies , Toki 509-5292, Japan
不详
不详
Plasma Fusion Res., 1 SPECIAL ISSUE
[2] Effect of Cr content on microstructure, mechanical properties and corrosion behavior of Ti6Al4V alloy produced by selective laser melting
Chen, Guoxia
Zhai, Qiang
Ma, Zhenghang
Yin, Xiaotian
Zhang, Qingxia
Zhou, Hanxiao
Meng, Lingtao
Wang, Kunlun
Wang, Shenghai
Wang, Li
MATERIALS TECHNOLOGY, 2022, 37 (09) : 1062 - 1074
[3] Oxygen-driven de-alloying of Fe-14Cr-12Ni-10Mn-3Cu-2.5Al-1Nb austenitic steel at 500 °C in static Pb-Bi eutectic with concentration of dissolved oxygen alternating from ' 10-6 to 10-9 mass% for 10000 h
Tsisar, Valentyn
Stergar, Erich
Gavrilov, Serguei
Maia, Eloa Lopes
Van Renterghem, Wouter
Louette, Pierre
Lucas, Stephane
CORROSION COMMUNICATIONS, 2025, 17 : 1 - 11
[4] Microstructure, mechanical and tribological properties of the nc-CrxCy/a-C and nc-CrxCy/a-C:H nanocomposite coatings on oxygen-hardened Ti-6Al-4V alloy
Zimowski, Slawomir
Moskalewicz, Tomasz
Kot, Marcin
Wendler, Bogdan
Czyrska-Filemonowicz, Aleksandra
SURFACE AND INTERFACE ANALYSIS, 2012, 44 (08) : 1225 - 1228
[5] Effect of direct aging on microstructure, mechanical properties and shape memory behavior of Fe-17Mn-5Si-10Cr-4Ni-(V, C) shape memory alloy fabricated by laser powder bed fusion
Kim, Dohyung
Ferretto, Irene
Leinenbach, Christian
Lee, Wookjin
Kim, Wangryeol
MATERIALS CHARACTERIZATION, 2023, 197

← 1 →