Finite element analysis of the shear behavior of prestressed high-strength concrente piles

被引:0
|
作者
Yang Z.-J. [1 ]
Lei Y.-Q. [1 ]
机构
[1] School of Civil Engineering, Shenyang Jianzhu University, Shenyang
来源
关键词
Axial compression ratio; Finite element analysis; PHC pile; Shear capacity; Shear span ratio;
D O I
10.6052/j.issn.1000-4750.2019.04.S036
中图分类号
学科分类号
摘要
By selecting suitable constitutive relations, we established 21 finite element models of prestressed high-strength concrete piles in ABAQUS. After verifying the correctness of the models, we investigated the shear span ratio, axial compression ratio, reinforcement rate of cube compressive strength of concrete and the prestressed reinforcement ratio influence parameters, such as the ultimate shear capacity of components and P-Δ relation curves. The results show that the shear span ratio has an effect on the shear performance of the piles, and that the ultimate shear capacity increases with the decreasing shear span ratio and the increasing ratio of prestressed bars. Compared with the prestressed members with ordinary reinforcement, the ultimate strength of the pile is higher, and the curve change rules under different shear span ratios are basically the same with the latter. Increasing the concrete strength can improve the shear strength of the pile, but the P-Δ relation curve at the elastic stage is almost the same. The ultimate shear capacity of the component increases with the increasing axial compression ratio. © 2020, Engineering Mechanics Press. All right reserved.
引用
收藏
页码:200 / 207
页数:7
相关论文
共 13 条
  • [1] Du Zhoufang, Seismic performance test and ductility analysis of PHC piles, (2016)
  • [2] Zhang Zhongmiao, Liu Junwei, Zou Jian, Et al., Experimental study on flexural-shear performance of reinforced prestressed concrete pipe piles, Journal of Zhejiang University, 45, 6, pp. 1074-1080, (2011)
  • [3] Seiji K, Katsumi Akira W, Et al., Experimental study on plastic deformability of high strength prestressed concrete piles under axial and lateral forces, Proceedings of the 8th World Conference on Earthquake Engineering, pp. 609-610, (1984)
  • [4] Seiji K, Akira W, Shizuo H., Bearing capacity and deformability of high strength prestressed concrete piles under axial and lateral force (part 4), Summaries of Technical Papers of Annual Meeting, pp. 973-976, (1985)
  • [5] Budek A M, Benzoni G, Priestley M J N., Experimental investigation of ductility of in-ground hinges in solid and hollow prestressed piles, Division of Structural Engineering, pp. 1-108, (1997)
  • [6] Yang Zhijian, Wang Wenjin, Kang Guyi, Ductility analysis of prestressed high strength concrete pipe piles under cyclic loading, Engineering Mechanics, 33, pp. 107-112, (2016)
  • [7] Wang Tiecheng, Wang Wenjin, Zhao Hailong, Et al., Experimental comparison of seismic performance of different high strength prestressed piles, Industrial Construction, 44, 7, pp. 84-89, (2014)
  • [8] Tang Jianan, Seismic performance and bearing capacity of new PHC pipe piles, (2017)
  • [9] Wang Tiecheng, Yang Zhijian, Zhao Hailong, Et al., Experimental study and numerical analysis of improving the seismic performance of prestressed high-strength concrete pipe piles, The 16th National Conference on Concrete and Prestressed Concrete and the 12th Conference on Prestressed Academic Exchange Episode, pp. 45-53, (2013)
  • [10] Guo Zhenhai, Strength and constitutive relation of concrete-principle and application, pp. 9-94, (1999)