Cyclic and uniaxial tensile properties of superelastic niti shape memory alloy cables

This study investigates the impact of various factors, including annealing duration, strain amplitude, cyclic loading, loading rate, and pre-training, on the mechanical properties of Nickel-Titanium shape memory alloy (SMA) cable. The primary focus is on evaluating their recovery ability and energy dissipation capabilities. The tested SMA cable has an outer diameter of 9 mm and a 7 x 7 configuration. The variation of strength, stiffness, residual strain, hysteretic energy, and equivalent viscous damping ratio of SMA cable with the loading cycle is analyzed. Furthermore, the impact of various annealing durations on the tensile strength and elongation of both SMA cables and wires was examined through monotonic tensile tests. The results indicate that the annealing duration considerably affects the superelastic behavior of SMA cables by shifting the stress-strain loops down and widening them. The recovery ability of SMA cable degrades more progressively with increasing loading amplitude and the number of loading cycles. The mechanical properties gradually stabilized after 20 times of constant strain amplitude loading and unloading training. The strain selection for cyclic training should not make the SMA cable in the martensite hardening stage. The recovery ability and peak stress of SMA cable can be significantly improved by pre-training. With the increase of annealing duration, the tensile strength of the SMA cable decreases gradually. Compared with SMA wire, SMA cable has better ductility and robustness and provides sufficient restoring force under large deformation.