Patient-specific palatal obturator prosthesis from DICOM files through low-cost 3D printing: A case study

被引：0
|
作者：
Romani, Alessia [1 ,2 ]
Paternoster, Luisa [3 ]
Gastaldi, Giorgio [3 ]
Levi, Marinella [1 ]
机构：
[1] Department of Chemistry, Materials and Chemical Engineering Giulio Natta, Politecnico di Milano, Piazza Leonardo da Vinci 32, Milano,20131, Italy
[2] Design Department, Politecnico di Milano, Via Durando, Milano,20158, Italy
[3] Dental School – Vita-Salute University and Department of Dentistry IRCCS San Raffaele Hospital, Milano, Italy
来源：
Materials Today: Proceedings | 2022年 / 70卷
关键词：
Compendex;
D O I：
10.1016/j.matpr.2022.08.553
中图分类号：
学科分类号：
摘要：
Silicones
引用
收藏
页码：106 / 112
相关论文
共 50 条
  • [1] The feasibility of producing patient-specific acrylic cranioplasty implants with a low-cost 3D printer
    Tan, Eddie T. W.
    Ling, Ji Min
    Dinesh, Shree Kumar
    JOURNAL OF NEUROSURGERY, 2016, 124 (05) : 1531 - 1537
  • [2] Applications of patient-specific 3D printing in medicine
    Heller, M.
    Bauer, H-K.
    Goetze, E.
    Gielisch, M.
    Roth, K. E.
    Maier, G. S.
    Drees, P.
    Dorweiler, B.
    Ghazy, A.
    Neufurth, M.
    Mueller, W. E. G.
    Schoerder, H. C.
    Wang, X. H.
    Vahl, C-F
    Al-Nawas, B.
    INTERNATIONAL JOURNAL OF COMPUTERIZED DENTISTRY, 2016, 19 (04) : 323 - 339
  • [3] 3D Printing of Rapid, Low-Cost and Patient-Specific Models of Brain Vasculature for Use in Preoperative Planning in Clipping of Intracranial Aneurysms
    Blaszczyk, Maciej
    Jabbar, Redwan
    Szmyd, Bartosz
    Radek, Maciej
    JOURNAL OF CLINICAL MEDICINE, 2021, 10 (06) : 1 - 12
  • [4] A feasibility study for using ABS plastic and a low-cost 3D printer for patient-specific brachytherapy mould design
    Benjamin D. Harris
    Sanna Nilsson
    Christopher M. Poole
    Australasian Physical & Engineering Sciences in Medicine, 2015, 38 : 399 - 412
  • [5] A feasibility study for using ABS plastic and a low-cost 3D printer for patient-specific brachytherapy mould design
    Harris, Benjamin D.
    Nilsson, Sanna
    Poole, Christopher M.
    AUSTRALASIAN PHYSICAL & ENGINEERING SCIENCES IN MEDICINE, 2015, 38 (03) : 399 - 412
  • [6] Design and Development of a Myoelectric Upper Limb Prosthesis with 3D Printing: A Low-Cost Alternative
    da Silva, Bruno Borges
    Porsani, Rodolfo Nucci
    Vasquez Hellmeister, Luiz Antonio
    Medola, Fausto Orsi
    Paschoarelli, Luis Carlos
    ADVANCES IN ADDITIVE MANUFACTURING, MODELING SYSTEMS AND 3D PROTOTYPING, 2020, 975 : 318 - 327
  • [7] DETECTING DEFECTS IN LOW-COST 3D PRINTING
    Forte, Mark
    Eisenhour, Madison
    Malkowski, Ryan M.
    Radhakrishnan, Pradeep
    Brown, David C.
    PROCEEDINGS OF ASME 2022 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2022, VOL 2A, 2022,
  • [8] Development of a customised 3D printer as a potential tool for direct printing of patient-specific facial prosthesis
    Cormac D. Fay
    Ali Jeiranikhameneh
    Sepidar Sayyar
    Sepehr Talebian
    Alex Nagle
    Kai Cheng
    Sophie Fleming
    Payal Mukherjee
    Gordon G. Wallace
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 7143 - 7155
  • [9] Development of a customised 3D printer as a potential tool for direct printing of patient-specific facial prosthesis
    Fay, Cormac D.
    Jeiranikhameneh, Ali
    Sayyar, Sepidar
    Talebian, Sepehr
    Nagle, Alex
    Cheng, Kai
    Fleming, Sophie
    Mukherjee, Payal
    Wallace, Gordon G.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (11-12): : 7143 - 7155
  • [10] 3D printing for patient-specific implants in musculoskeletal oncology
    Kotrych, Daniel
    Angelini, Andrea
    Bohatyrewicz, Andrzej
    Ruggieri, Pietro
    EFORT OPEN REVIEWS, 2023, 8 (05) : 331 - 339
12345