Vibration Suppression of Telescopic Arm Based on Differential Flatness and Active Disturbance Rejection Control

被引：0
|
作者：
Jiang H. [1 ,2 ]
Xing Y. [2 ]
Li N. [2 ]
Jiang W. [1 ]
机构：
[1] School of Mechanical Engineering, Yanshan University, Qinhuangdao
[2] College of Electrical and Mechanical, Hebei Agricultural University, Baoding
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2020年 / 51卷 / 03期
关键词：
Active disturbance rejection control; Differential flatness; Telescopic arm; Vibration suppression;
D O I：
10.6041/j.issn.1000-1298.2020.03.046
中图分类号：
学科分类号：
摘要：
The manned aerial vehicle with the telescopic arm is full of danger in the parameter tuning process. It is necessary to construct a vibration suppression controller which is effective and easy to tune. The telescopic arm was theoretically divided into two rigid bodies. The dynamics of the equivalent second-order underactuated system was established based on the Lagrange equation. The model adopted the combination of elevation increment of the first link and tip acceleration of the second link to flatten the system, and made it into a second-order single input single output model. The input gain and coefficient of zero-order term were automatically updated along with the elevation or length change of the arm and substituted them into the active disturbance rejection control (ADRC) system. Application of the proposed algorithm was shown on the simulation and experiment platform. The favorable results of arm stability was achieved under the controlling of flatness-ADRC in the case of changing in length and angle. Under the two working conditions of extension and shortening, the balance can all be restored within 2 s. It was an innovation to design differential flat system with two different physical quantities, in addition the clear physical meaning of parameters in tuning process was very important in this life-related system. Under the condition of simplified model, the parameters of the control system were adjusted according to the extension length and attitude, which ensured the system's disturbance rejection ability to be continuous and effective. © 2020, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码：394 / 401
页数：7
相关论文
共 23 条
  • [1] Alexander Z., Sawodny O., Stabilization of a flexible manipulator model with passive joints, IFAC Proceedings Volumes, 38, 1, pp. 784-789, (2005)
  • [2] Alexander P., Sawodny O., Modeling of coupled bending and torsional oscillations of an inclined aerial ladder, 2013 American Control Conference, (2013)
  • [3] Li S., Yang J., Huang Q., Et al., Experimental research on active vibration control of flexible cntilever beam under harmonic and stochastic excitation, Journal of Vibration and Shock, 3, pp. 3-6, (2001)
  • [4] Wang L., Study on the dynamics and control of axially moving beams, (2011)
  • [5] Zhang X., Wang R., Wang Z., Et al., Vibration suppression of piezoelectric integrated flexible manipulators using H-∞ optimized disturbance rejection control, Journal of Northwestern Polytechnical University, 35, 4, pp. 661-668, (2017)
  • [6] Weldegiorgis R., Krishna P., Gangadharan K.V., Vibration control of smart cantilever beam using strain rate feedback, Procedia Materials Science, 5, pp. 113-122, (2014)
  • [7] Zheng Q., Richter H., Gao Z., On active vibration suppression of a piezoelectric beam, American Control Conference (ACC), pp. 6628-6633, (2013)
  • [8] Zheng Q., Gao Z., On observer-based active vibration control of two-inertia systems, American Control Conference (ACC), pp. 6634-6639, (2013)
  • [9] Zhang H., Zhao S., Gao Z., An active disturbance rejection control solution for the two-mass-spring benchmark problem, American Control Conference (ACC) Boston Marriott Copley Place, pp. 1566-1571, (2016)
  • [10] Han J., From pid to active disturbance rejection control, IEEE Transactions on Industrial Electronics, 56, 3, pp. 900-906, (2009)
123