Stability of Ion Beam Polishing Removal Function on Fused Silica Surface

被引：0
|
作者：
Wu P.-F. [1 ]
Wang C.-Y. [1 ,2 ]
Li X.-J. [3 ]
Zhao S.-Y. [3 ]
Wang D.-S. [3 ]
Nie F.-M. [3 ]
机构：
[1] School of Electronic and Information Engineering, Changchun University of Science and Technology, Changchun
[2] School of Defence Science and Technology, Xi'an Technological University, Xi'an
[3] Ningbo Branch of Chinese Academy of Ordnance Science, Zhejiang, Ningbo
来源：
Surface Technology | 2022年 / 51卷 / 04期
关键词：
Faraday Cup test; ion beam current density; ion beam polishing; removal function; stability;
D O I：
10.16490/j.cnki.issn.1001-3660.2022.04.029
中图分类号：
学科分类号：
摘要：
The work aims to test the stability of the removal function during ion beam polishing on the surface of fused silica components. By controlling the ion beam to scan along the Faraday cup, the ion beam density information was detected. Based on the sputtering theory, a mathematical model of the removal function was established. Experimental research was carried out on the ion beam density and the removal function information, and the relationship between them was obtained by comparing and analyzing the experimental results, and a method for calculating the removal function information was obtained based on the Faraday scan results. Using this method, the characteristic quantity of removal function in ion beam etching process was obtained, the fluctuation of the characteristic quantity of the removal function over time was analyzed to judge the stability of the removal function, and the ion beam polishing experiment was carried out on the surface of the fused silica element. The ion source was operated for a long time under the energy of 1 keV ion beam, and the removal function during the experiment was calculated by the above method. Through calculation, the peak removal rate (Pmax), volume removal rate (V) and full width at half maximum (FWHM) of the removal function during the ion beam polishing process were all less than 3% in 8 hours. Combining the ion beam polishing experiment, the Φ100 mm fused silica optical element was polished, the PV value of the polished back shape dropped from 0.78λ to 0.16λ, and the RMS value dropped from 72.39 nm to 16.64 nm. The removal function is monitored for a long time by Faraday scanning, and the characteristic parameters of the removal function have good stability in the long time experiment. The surface parameters of fused quartz element are processed by ion beam, and the parameters meet the requirements of optical ultra-precision machining. © 2022, Chongqing Wujiu Periodicals Press. All rights reserved.
引用
收藏
页码：284 / 291
页数：7
相关论文
共 24 条
  • [1] DAI Yi-fan, ZHOU Lin, XIE Xu-hui, Et al., Ion Beam Figuring Technology, Journal of Applied Optics, 32, 4, pp. 171-178, (2011)
  • [2] XI Ying-xue, LIU Wei-guo, MA Zhan-peng, Et al., Research on High Deterministic Removal Characteristics of Fused Quartz Using RF Focused Ion Beam Source, Journal of Applied Optics, 40, 2, pp. 284-290, (2019)
  • [3] SHI Feng, SHU Yong, SONG Ci, Et al., Advances in Shape Controllable and Property Controllable Manufacturing Technology for Ultraviolet Fused Silica Components with High Precision and few Defects, High Power Laser and Particle Beams, 32, 3, pp. 15-21, (2020)
  • [4] LI Xiao-jing, WANG Da-sen, WANG Gang, Et al., Edge Effect Suppression of Ion Beam Figuring Process on Optical Component Surface, Surface Technology, 49, 1, pp. 349-355, (2020)
  • [5] JIAO Chang-jun, LI Sheng-yi, XIE Xu-hui, Et al., Contro-llability of Removal Function in the Ion Beam Figuring Process for Optics Mirrors, Optical Technique, 34, 5, pp. 651-654, (2008)
  • [6] JENS B, MELANIE U, FRED P, Et al., Improved Ion Beam Tools for Ultraprecision Figure Correction of Curved Aluminum Mirror Surfaces, Journal of Astronomical Telescopes, Instruments, and Systems, 4, 4, (2018)
  • [7] WU Wei-bin, DAI Yi-fan, ZHOU Lin, Et al., Research on Material Removal Accuracy Analysis and Correction of Removal Function during Ion Beam Figuring, Optical Engineering, 55, 9, (2016)
  • [8] DUAN Jin-xin, XIE Xu-hui, ZHOU Lin, Study of Stabilization of the Ion Source in Ion Beam Figuring Progress for Optics Mirrors, Aviation Precision Manufacturing Technology, 46, 5, pp. 10-13, (2010)
  • [9] LIAO Wen-lin, DAI Yi-fan, XIE Xu-hui, Et al., Corrective Capability Analysis and Machining Error Control in Ion Beam Figuring of High-Precision Optical Mirrors, Optical Engineering, 51, 3, pp. 33402-1, (2012)
  • [10] CHEN Gui-yang, XIE Xu-hui, ZHOU Lin, Et al., Removal Function and Stability Study of RF Ion Source for Optics Figuring, Aviation Precision Manufacturing Technology, 52, 5, pp. 19-22, (2016)
123