Wireless Inductive Displacement Sensor 3D Printed using Additive Technology

被引：0
|
作者：
Kisić, Milica [1 ]
Babković, Kalman [1 ]
Damnjanović, Mirjana [1 ]
机构：
[1] University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia
来源：
2023 IEEE International Magnetic Conference - Short Papers, INTERMAG Short Papers 2023 - Proceedings | 2023年
关键词：
Compendex;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Inductive sensors
引用
收藏
相关论文
共 50 条
  • [1] Wireless Inductive Displacement Sensor 3-D Printed Using Additive Technology
    Kisic, Milica G.
    Babkovic, Kalman B.
    Damnjanovic, Mirjana S.
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2023, 59 (11)
  • [2] 3-D Printed Inductive Displacement/Force Sensor
    Babkovic, Kalman
    Kisic, Milica
    Damnjanovic, Mirjana
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2023, 59 (02)
  • [3] Displacement Sensor Fabricated by 3D Additive Manufacturing
    Blaz, Nelu
    Kisic, Milica
    Zivanov, Ljiljana
    Damnjanovic, Mirjana
    [J]. 2017 40TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2017,
  • [4] Design and Modelling of 3D Printed Capacitive Displacement Sensor
    Srdic, Bojan
    Stefanov, Aleksandar
    Kisic, Milica
    Zivanov, Ljiljana
    Menicanin, Aleksandar
    [J]. 2021 44TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2021,
  • [5] Towards a 3D Printed Strain Sensor Employing Additive Manufacturing Technology for the Marine Industry
    Kouvatsos, Theodoros
    Pagonis, Dimitrios Nikolaos
    Iakovidis, Isidoros
    Kaltsas, Grigoris
    [J]. APPLIED SCIENCES-BASEL, 2024, 14 (15):
  • [6] Flexible Printed Pressure Sensor Integrated into Inner Wall of a 3D Tube using Additive Manufacturing
    Tintelott, M.
    Dumstorff, G.
    Lucklum, F.
    Graebner, D.
    [J]. 2017 IEEE SENSORS, 2017, : 184 - 186
  • [7] A 3D Printed Near-Isotropic Antenna for Wireless Sensor Networks
    Farooqui, Muhammad Fahad
    Shamim, Atif
    [J]. 2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP), 2016, : 94 - 95
  • [8] 3D Inkjet Printed Disposable Environmental Monitoring Wireless Sensor Node
    Farooqui, Muhammad Fahad
    Shamim, Atif
    [J]. 2017 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2017, : 1375 - 1378
  • [9] Additive architecture: 3D printed architecture
    Peters, Brian
    [J]. ARCHITECTURAL RESEARCH ADDRESSING SOCIETAL CHALLENGES, VOLS 1 AND 2, 2017, : 811 - 816
  • [10] 3D printed tissue and organ using additive manufacturing: An overview
    Javaid, Mohd
    Haleem, Abid
    [J]. CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH, 2020, 8 (02): : 586 - 594
12345