Three-axis angle measurement method based on an optical wedge

被引：0
|
作者：
Wang, Jinkai [1 ]
Bai, Yangyang [1 ,2 ]
Zhao, Wenhe [1 ]
Xie, Ningning [1 ]
Zhang, Lizhong [1 ,2 ]
机构：
[1] Changchun Univ Sci & Technol, Coll Mech & Elect Engn, Changchun 130022, Peoples R China
[2] Changchun Univ Sci & Technol, Key Lab Air To Ground Laser Commun Natl Def, Changchun 130022, Peoples R China
来源：
APPLIED OPTICS | 2024年 / 63卷 / 04期
基金：
中国国家自然科学基金;
关键词：
Molecular physics;
D O I：
10.1364/AO.510238
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
A three -axis angle measurement method is proposed using an optical wedge as a reflector. In this paper, the mathematical model of three -axis angle solving corresponding to the method is derived, and it is verified and corrected by establishing an optical simulation model, and, finally, the feasibility and measurement accuracy of the method are verified by using a principle prototype. The experimental results show that the RMS values of the measurement errors of pitch angle alpha, yaw angle beta, and roll angle gamma are 6.27 '', 4.35 '', and 17.68 '', respectively, within the measurement range of +/- 2(degrees), and the measurement accuracy is insensitive to the measurement distance. (c) 2024 Optica Publishing Group
引用
收藏
页码：1125 / 1134
页数：10
相关论文
共 50 条
  • [1] Impact of three-axis error on angle measurement of photoelectric theodolite
    [J]. Tian, L. (tianliude@126.com), 1600, Chinese Society of Astronautics (42):
  • [2] Measurement Method for Orthogonal Three Intersecting Axis Perpendicularity of Three-axis Turntable
    Zhou Jie
    Sun Pingyue
    Chang Jiantao
    [J]. 2013 FOURTH INTERNATIONAL CONFERENCE ON INTELLIGENT SYSTEMS DESIGN AND ENGINEERING APPLICATIONS, 2013, : 374 - 377
  • [3] Calibration of digital speckle pattern interferometry based on three-axis angle motions measurement theory
    Yan, Yang
    Wu, Sijin
    Shi, Lili
    Li, Weixian
    Si, Juanning
    Niu, Haisha
    [J]. OPTICAL METROLOGY AND INSPECTION FOR INDUSTRIAL APPLICATIONS IX, 2022, 12319
  • [4] Probe design based on three-axis acceleration measurement
    Sun, Hongjun
    Liu, Ziqi
    Yu, Tao
    [J]. 2016 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE PROCEEDINGS, 2016, : 23 - 27
  • [5] Development of a three-axis angle sensor - Proposal of the measurement principle and identification experiments
    Saito, Yusuke
    Arai, Yoshikazu
    Gao, Wei
    [J]. Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2008, 74 (09): : 997 - 1001
  • [6] An attitude measurement method to compensate the error of algorithm precision based on three-axis gyroscope
    Shi, Yixiang
    Chen, Ke
    Chen, Deyi
    [J]. PROCEEDINGS OF THE 2017 GLOBAL CONFERENCE ON MECHANICS AND CIVIL ENGINEERING (GCMCE 2017), 2017, 132 : 36 - 41
  • [7] Optical pump magnetometers parametric correction method based on three-axis coil arrays
    Liang, Shuang
    Zhu, Yanxing
    He, Junhuai
    Qi, Jiahe
    Jia, Yikang
    Wang, Aimin
    Zhao, Ting
    Wei, Chaoliang
    Jiao, Hongchen
    Feng, Lishuang
    Cheng, Heping
    [J]. Measurement: Journal of the International Measurement Confederation, 2025, 242
  • [8] Three-axis optical alignment system
    Barns, C.
    [J]. Experimental Techniques, 1990, 14 (04) : 49 - 51
  • [9] Axis intersection measurement of three-axis turntable with a filament
    Ren, Shunqing
    Zeng, Qingshuang
    Yang, Qihui
    [J]. Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2002, 13 (15):
  • [10] Three-axis ultraviolet optical sensor
    Wei, Zhi-Jun
    Liu, Xiao-Jun
    [J]. Guangdian Gongcheng/Opto-Electronic Engineering, 2008, 35 (11): : 86 - 90
12345