Naphthalene oxidation by different nonthermal electrical discharges at atmospheric pressure

Gaseous naphthalene has been removed by air plasma generated by pulsed corona discharges at100 °C（LSPM） and dielectric barrier discharges（DBD） up to 250 °C（LPGP） in different reactors geometries. Naphthalene has been chosen as one of unburned hydrocarbon present in exhaust gas engine during the cold start of vehicles. The comparison between the different discharge geometries has been possible using the specific input energy（SIE） as relevant parameter for pollutant removal process control considering the differences in the electrical characteristics and the differences of gas flow. The best naphthalene degradation is obtained in the wire-to cylinder（WTC） corona discharge and the stem-to-cylinder DBD with an energy costβ respectively of 10 and 20 J L-1. The main by-products issues of the naphthalene oxidation are CO2 and CO reaching 45% in Multi-Pin-to-Plan corona discharge. We detected polyaromatic hydrocarbons in the gas phase（few ppm） and in the solid phase deposited in the reactors. The introduction of water in the discharges promotes the naphthalene degradation by OH-atom,which has better oxidising power than O-atom in dry air.