Microstructure, optical, and photoluminescence properties of β-Ga2O3 films prepared by pulsed laser deposition under different oxygen partial pressures

The β-GaOfilms are prepared on polished AlO(0001) substrates by pulsed laser deposition at different oxygen partial pressures. The influence of oxygen partial pressure on crystal structure, surface morphology, thickness, optical properties, and photoluminescence properties are studied by x-ray diffraction(XRD), atomic force microscope(AFM),scanning electron microscope(SEM), spectrophotometer, and spectrofluorometer. The results of x-ray diffraction and atomic force microscope indicate that with the decrease of oxygen pressure, the full width at half maximum(FWHM) and grain size increase. With the increase of oxygen pressure, the thickness of the films first increases and then decreases.The room-temperature UV-visible(UV-Vis) absorption spectra show that the bandgap of the β-GaOfilm increases from4.76 e V to 4.91 e V as oxygen pressure decreasing. Room temperature photoluminescence spectra reveal that the emission band can be divided into four Gaussian bands centered at about 310 nm(～ 4.0 e V), 360 nm(～ 3.44 e V), 445 nm(～2.79 e V), and 467 nm(～ 2.66 e V), respectively. In addition, the total photoluminescence intensity decreases with oxygen pressure increasing, and it is found that the two UV bands are related to self-trapped holes(STHs) at O1 sites and between two O2-s sites, respectively, and the two blue bands originate from Vat Ga1 tetrahedral sites. The photoluminescence mechanism of the films is also discussed. These results will lay a foundation for investigating the GaOfilm-based electronic devices.