WATER MODEL SIMULATION OF TUNDISH FLOW UNDER VARYING CONDITIONS

被引:9
|
作者
GODIWALLA, KM
SINHA, SK
SIVARAMAKRISHNAN, CS
机构
[1] Natl Metallurgical Lab, Jamshedpur
来源
STEEL RESEARCH | 1994年 / 65卷 / 07期
关键词
D O I
10.1002/srin.199401069
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Water model studies have been conducted to characterise the flow conditions in continuous casting tundishes under conditions of open and submerged nozzles. In this investigation simulations of practical problems of flow interruptions from the ladle, thermal inversions due to uninsulated ladle, and pneumatic agitation near the tundish end wall were conducted. The studies showed that incorporation of suitable flow control devices brings about homogenisation of temperature and composition between strands in the above cases. This study also showed that agitation of the liquid at the end wall reduces the extent of stagnant zone in the tundish.
引用
收藏
页码:267 / 272
页数:6
相关论文
共 50 条
  • [1] Fluid flow behaviour in a water model tundish under open, submerged and modified inlet conditions
    Sinha, SK
    Godiwalla, KM
    Shaw, DK
    Sivaramakrishnan, CS
    [J]. SCANDINAVIAN JOURNAL OF METALLURGY, 2001, 30 (02) : 103 - 107
  • [2] Optimization of steel flow in the continuous casting tundish by water model simulation
    Bellouar, A
    Dumortier, C
    Riquier, Y
    Strebelle, H
    [J]. REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1999, 96 (01): : 41 - 47
  • [3] Numerical model for the simulation of soil water flow under root absorption conditions
    del Vigo, A.
    Juana, L.
    Rodriguez-Sinobas, L.
    [J]. INGENIERIA DEL AGUA, 2022, 26 (01): : 37 - 46
  • [4] A MODEL TO TEST GRAFTS IN THE VENOUS SYSTEM UNDER VARYING FLOW CONDITIONS
    RIBBE, EB
    BENGMARK, SBS
    [J]. JOURNAL OF CARDIOVASCULAR SURGERY, 1988, 29 (02): : 155 - 160
  • [5] FLUID-FLOW IN TWIN STRAND TUNDISH WATER MODEL
    GODIWALLA, KM
    SINHA, SK
    SIVARAMAKRISHNAN, CS
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1992, 45 (04): : 247 - 251
  • [6] Inertial and buoyancy driven water flows under gas bubbling and thermal stratification conditions in a tundish model
    Vargas-Zamora, A
    Morales, RD
    Díaz-Cruz, M
    Palafox-Ramos, J
    Barreto-Sandoval, JD
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2004, 35 (02): : 247 - 257
  • [7] Inertial and buoyancy driven water flows under gas bubbling and thermal stratification conditions in a tundish model
    A. Vargas-Zamora
    J. Palafox-Ramos
    R. D. Morales
    M. Díaz-Cruz
    J. de J. Barreto-Sandoval
    [J]. Metallurgical and Materials Transactions B, 2004, 35 : 247 - 257
  • [8] Experimental and Simulation Analysis of Physical Water Model through Tracer Injection under Various Baffles and Turbulence Inhibitor Conditions for Developing the Fluid Flow Parameters and Inclusion Removal Rates in Tundish
    Yadav, Jaywant Namdev
    Singh, Netra Pal
    [J]. BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY, 2022, 12 (05): : 6361 - 6381
  • [9] Fluid Flow Characterization of Single-Strand Tundish with Flow Modifiers through Physical Water Model (PWM) and CFD Simulation
    Yadav, Jaywant Namdev
    Singh, Netra Pal
    [J]. BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY, 2022, 12 (01): : 211 - 221
  • [10] Optimization of the Liquid Steel Flow Behavior in the Tundish through Water Model Experiment, Numerical Simulation and Industrial Trial
    Liu, Junda
    Zhou, Ping
    Zuo, Xiaotan
    Wu, Di
    Wu, Dongling
    [J]. METALS, 2022, 12 (09)