Effect of infill density and infill pattern on the mechanical properties of 3D printed PLA parts

被引：0
|
作者：
Ambati, Shivani Sriya [1 ]
Ambatipudi, Ravindra [1 ]
机构：
[1] MLR Inst Technol, Dept Mech Engn, Hyderabad 500043, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2022年 / 64卷
关键词：
Fused deposition modeling (FDM); 3D printing; PLA; Tensile strength; Infill density;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
3D printing is one of the fast-growing technology widely used all over globe. Fused deposit modeling (FDM) is one of the 3D printing technologies which creates physical objects from CAD models with the help fused thermoplastic filaments of Poly (lactic) acid (PLA), Acrylonitrile Butadiene Styrene (ABS), etc. The goal of this study is to see how 3D printing parameters such as infill density and infill pattern effect the mechanical properties of Poly Lactic Acid (PLA). At 3 different infill densities (60%,75% and 90%) and 3 infill patterns (grid, triangle and gyroid), 3D printed PLA parts are examined for tensile strength measurements and the optimized parametric conditions are identified. Copyright (c) 2022 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advanced Materials for Innovation and Sustainability.
引用
收藏
页码：804 / 807
页数：4
相关论文
共 50 条
  • [1] Effect of infill density and infill pattern on the mechanical properties of 3D printed PLA parts
    Ambati, Shivani Sriya
    Ambatipudi, Ravindra
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 804 - 807
  • [2] Effect of infill pattern and infill density on mechanical behaviour of FDM 3D printed Parts- a current review
    Tanveer, Md Qamar
    Mishra, Gautam
    Mishra, Siddharth
    Sharma, Rohan
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 100 - 108
  • [3] Effect of infill pattern and infill density on mechanical behaviour of FDM 3D printed Parts- a current review
    Tanveer, Md. Qamar
    Mishra, Gautam
    Mishra, Siddharth
    Sharma, Rohan
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 100 - 108
  • [4] Influence of the infill density and infill patterns on the compressive mechanical properties of 3D printed PLA specimens
    Serrano-Cinchilla, Luis
    Bustamante-Goez, Liliana
    Villarraga-Ossa, Junes
    [J]. UIS INGENIERIAS, 2022, 21 (02): : 107 - 114
  • [5] Effects of Infill Density on the Mechanical Properties of 3D Printed PLA and Conductive PLA
    Keat, Yeoh Cheow
    Yin, Yap Wit
    Ramli, Mohammad Zikry
    Leng, Teh Pei
    Chie, Song Cheah
    [J]. 5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [6] Infill pattern and density effects on the tensile properties of 3D printed PLA material
    Rismalia, M.
    Hidajat, S. C.
    Permana, I. G. R.
    Hadisujoto, B.
    Muslimin, M.
    Triawan, F.
    [J]. 4TH ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE, 2019, 2019, 1402
  • [7] Effect of infill on tensile and flexural strength of 3D printed PLA parts
    Khan, S. F.
    Zakaria, H.
    Chong, Y. L.
    Saad, M. A. M.
    Basaruddin, K.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING AND INDUSTRY APPLICATIONS, 2018, 429
  • [8] Effects of raster orientation, infill rate and infill pattern on the mechanical properties of 3D Printed materials
    [J]. 2017, Sciendo (69)
  • [9] An investigation to study the combined effect of different infill pattern and infill density on the impact strength of 3D printed polylactic acid parts
    Mishra, Pradeep Kumar
    Senthil, P.
    Adarsh, S.
    Anoop, M. S.
    [J]. COMPOSITES COMMUNICATIONS, 2021, 24
  • [10] Infill Density Effects on the Mechanical and Thermal Properties of Copper-Plated 3D Printed Parts
    Ludergnani, Tommaso
    Fredi, Giulia
    Malagutti, Lorenzo
    Balbo, Andrea
    Dorigato, Andrea
    Mollica, Francesco
    Mazzanti, Valentina
    [J]. MACROMOLECULAR MATERIALS AND ENGINEERING, 2023, 308 (12)
12345