EVALUATION OF THE MECHANICAL STRENGTH OF WELDED JOINTS BY SFA AND GTAW PROCESS OF MAGNESIUM ALLOY AZ31B

被引：0

作者：

Arnaldo Avila, Julian ^{[1
,2
,3
]}

Jaramillo Suarez, Hector Enrique ^{[2
]}

Franco Arenas, Fernando ^{[3
,4
]}

机构：

[1] Univ Autonoma Occidente, Ingn Mat, Cali, Colombia

[2] Univ Autonoma Occidente, Grp Invest Ciencia & Ingn Mat, Cali, Colombia

[3] Univ Valle, Grp Invest Mat Compuestos, Cali, Colombia

[4] Univ Valle, Escuela Ingn Mat, Cali, Colombia

来源：

HOMBRE Y LA MAQUINA | 2010年 / 35期

关键词：

stirring-friction agitation welding; Mg AZ31B alloy; fractographic; strength;

D O I：

暂无

中图分类号：

TP3 [计算技术、计算机技术];

学科分类号：

0812 ;

摘要：

This paper present the results of the evaluation of mechanical behavior of magnesium alloy welded joints AZ31B using stirring-friction agitation welding (SFA) and GTAW, to the assessment of the tensile strength and microhardness of welded joints, made an analysis of explanatory type of correlation with changes in microstructure, grain sizes present in different zones, and quality defects, further fractographic analysis was performed to determine the cause of failure in welded specimens and tested. The results showed a higher tensile strength of welded joints for GTAW, compared with SFA joins.

引用

页码：166 / 171

页数：6

共 50 条

[1] FATIGUE OF FRICTION STIR AND GTAW WELDED AZ31B MAGNESIUM ALLOY
Avila, J. A.
Jaramillo, H. E.
Franco, F.
PROCEEDINGS OF THE ASME 31ST INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2012, VOL 6, 2012, : 365 - 370
[2] The Effect of GTAW Variants on Tensile and Microstructural Properties of AZ31B Magnesium Alloy Joints
Subravel, V.
Padmanaban, G.
Rajamurugan, T. V.
Seeman, M.
Chandrasekaran, V.
Rajaganapathy, C.
Lenin, Haiter A.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
[3] CHARACTERIZATION OF AZ31B MAGNESIUM ALLOY JOINTS WELDED WITH A Nd:YAG LASER
Liu, Hongtao
Zhou, Jixue
Chen, Yanfei
Li, Tao
Jiao, Xuebing
Yang, Yuansheng
Lin, Tao
Cheng, Kaiming
MATERIALI IN TEHNOLOGIJE, 2018, 52 (04): : 487 - 492
[4] Mechanical and Fatigue Strength Assessment of Friction Stir Welded Plates of Magnesium Alloy AZ31B
Fernando Luna, Carlos
Franco Arenas, Fernando
Pereira, Victor Ferrinho
Avila, Julian Arnaldo
SOLDAGEM & INSPECAO, 2018, 23 (01): : 52 - 59
[5] Microstructure and properties of electron beam welded joints of AZ31B magnesium alloy
Ningbo Branch, China Academy of Ordnance Science, Ningbo 315103, China
Hanjie Xuebao, 2008, 9 (75-78):
[6] Solderability of AZ31B Magnesium Alloy Coated by Copper and Strength of the Solder Joints
J. J. Jiang
Q. K. Zhang
F. Q. Hu
Z. L. Song
Journal of Materials Engineering and Performance, 2019, 28 : 5450 - 5457
[7] Solderability of AZ31B Magnesium Alloy Coated by Copper and Strength of the Solder Joints
Jiang, J. J.
Zhang, Q. K.
Hu, F. Q.
Song, Z. L.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (09) : 5450 - 5457
[8] Evolution of microstructures and mechanical properties of AZ31B magnesium alloy weldment with active oxide fluxes and GTAW process
Lin, Chun-Ming
Liu, Ju-Jen
Tsai, Hsien-Lung
Cheng, Ching-Min
JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2011, 34 (08) : 1013 - 1023
[9] Microstructure and fatigue performance of electron beam welded joints of AZ31B magnesium alloy
Wang, Wenxian, 1600, Science Press (49):
[10] Fatigue Assessment of Welded Joints in AZ31B Magnesium Alloy by a Critical Plane Method
Yan Zhifeng
He Xiuli
Wang Wenxian
Zhang Hongxia
RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (11) : 2669 - 2674

← 1 2 3 4 5 →