PRODUCTION OF HIGH-STRENGTH REINFORCING WIRE FROM ORDINARY CARBON-STEELS

被引：0
|
作者：
PIROGOV, VA
BABICH, VK
FETISOV, VP
MIKHAILETS, LA
STARCHENKO, VS
BONDARENKO, VI
机构：
[1] ORLOVO STEEL ROLLING PLANT,ORLOVO,USSR
[2] ALL UNION REINFORCED CONCRETE RES INST,MOSCOW,USSR
来源：
STEEL IN THE USSR | 1981年 / 11卷 / 10期
关键词：
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The authors describe trials with rod of St5ps and St3kp steels with 0. 32 and 0. 16% carbon involving cooling to lower temperatures (570 degree C and 630 degree C for St3kp and 630 degree C for St5ps) followed by drawing down to 4. 5, and 6 mm. The level and uniformity of properties and the influence of carbon variation are determined.
引用
收藏
页码：583 / 585
页数：3
相关论文
共 50 条
  • [1] Production of wire rod for high-strength reinforcing cord
    Sychkov A.B.
    Zhigarev M.A.
    Zhukova S.Y.
    Kucherenko O.L.
    Repin I.V.
    Steel in Translation, 2010, 40 (01) : 78 - 81
  • [2] Production of high-strength reinforcing wire with a periodic profile
    Rudakov V.P.
    Pudov E.A.
    Litvinova N.V.
    D'yachkova A.A.
    Steel in Translation, 2009, 39 (04) : 349 - 350
  • [3] Hysteretic model of ordinary and high-strength reinforcing steel
    Balan, Toader A.
    Filippou, Filip C.
    Popov, Egor P.
    Journal of structural engineering New York, N.Y., 1998, 124 (03): : 288 - 297
  • [4] Hysteretic model of ordinary and high-strength reinforcing steel
    Balan, TA
    Filippou, FC
    Popov, EP
    JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1998, 124 (03): : 288 - 297
  • [5] THE ELECTROCHEMICAL STUDY OF STRESS-CORROSION CRACKING OF SOME HIGH-STRENGTH CARBON-STEELS
    RADOVICI, O
    POPA, MV
    CORROSION, 1981, 37 (08) : 443 - 449
  • [6] Production of high-strength reinforcing bars
    Yur'ev, A.B.
    Chinokalov, V.Ya.
    Zezikov, M.V.
    Efimov, O.Yu.
    Klepikov, A.G.
    Stal', 2004, (05): : 88 - 89
  • [7] MECHANICAL-PROPERTIES OF HIGH-STRENGTH 0.05 PERCENT CARBON-STEELS AND RELATIONSHIP WITH THEIR MICROSTRUCTURE
    FALCO, M
    PARRINI, C
    POZZI, A
    METALLURGIA ITALIANA, 1975, 67 (7-8): : 361 - 372
  • [8] RESISTANCE OF HIGH-STRENGTH REINFORCING STEELS TO CORROSION CRACKING
    IZVOLSKII, VV
    VYSHVANYUK, IM
    STEEL IN THE USSR, 1978, 8 (09): : 535 - 536
  • [9] HIGH-STRENGTH CARBON-STEELS WITH HEREDITARY FINE CRYSTAL-STRUCTURE .3. EFFECT OF THE STRUCTURE ON THE MECHANICAL-PROPERTIES OF POWDERED CARBON-STEELS
    RADOMYSELSKII, ID
    DZYUBENKO, AI
    LYAPUNOV, AP
    PODREZOV, YN
    DRACHINSKII, AS
    SOVIET POWDER METALLURGY AND METAL CERAMICS, 1987, 26 (01): : 86 - 89
  • [10] MANUFACTURE OF HIGH-STRENGTH REINFORCING WIRE USING HEAT HARDENED LOW CARBON WIRE ROD.
    Pirogov, V.A.
    Mikhaylets, L.A.
    Khudik, V.T.
    Fetisov, V.P.
    1987, 1 (01): : 123 - 126
12345