A cost-effective micromilling platform for rapid prototyping of microdevices

被引:22
|
作者
Yen, Daniel P. [1 ]
Ando, Yuta [1 ]
Shen, Keyue [1 ,2 ]
机构
[1] Univ Southern Calif, Viterbi Sch Engn, Dept Biomed Engn, Los Angeles, CA 90089 USA
[2] Univ Southern Calif, Keck Sch Med, Norris Comprehens Canc Ctr, Los Angeles, CA 90033 USA
来源
TECHNOLOGY | 2016年 / 4卷 / 04期
关键词
Micromilling; Rapid Prototyping; Organ-on-a-Chip; Lab-on-a-Chip; Microfluidics; Microdevice;
D O I
10.1142/S2339547816200041
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Micromilling has great potential in producing microdevices for lab-on-a-chip and organ-on-a-chip applications, but has remained under-utilized due to the high machinery costs and limited accessibility. In this paper, we assessed the machining capabilities of a low-cost 3-D mill in polycarbonate material, which were showcased by the production of microfluidic devices. The study demonstrates that this particular mill is well suited for the fabrication of multi-scale microdevices with feature sizes from micrometers to centimeters.
引用
收藏
页码:234 / 239
页数:6
相关论文
共 50 条
  • [1] Cost-effective rapid prototyping of VLSI systems
    Schwarzbacher, AT
    Broschk, T
    Hektor, T
    [J]. QRM 2002: PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON QUALITY, RELIABILITY, AND MAINTENANCE, 2002, : 99 - 102
  • [2] Towards Rapid and Cost-Effective Prototyping of IoT Platforms
    Guan, Gaoyang
    Dong, Wei
    Gao, Yi
    Bu, Jiajun
    [J]. 2016 IEEE 24TH INTERNATIONAL CONFERENCE ON NETWORK PROTOCOLS (ICNP), 2016,
  • [3] A Flexible and Cost Effective Gate Drive Platform for Rapid Prototyping
    Shea, Adam
    Ludois, Daniel C.
    [J]. 2014 TWENTY-NINTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC), 2014, : 560 - 565
  • [4] A Cost-Effective 3D SoC Silicon Prototyping Platform
    Yang, Chih-Chyau
    Wu, Chien-Ming
    Huang, Chun-Ming
    [J]. JOURNAL OF INFORMATION SCIENCE AND ENGINEERING, 2015, 31 (06) : 1885 - 1901
  • [5] MBSE Testbed for Rapid, Cost-Effective Prototyping and Evaluation of System Modeling Approaches
    Madni, Azad M.
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (05): : 1 - 19
  • [6] Safe and cost-effective rapid-prototyping of multilayer PMMA microfluidic devices
    Liga, Antonio
    Morton, Jonathan A. S.
    Kersaudy-Kerhoas, Maiwenn
    [J]. MICROFLUIDICS AND NANOFLUIDICS, 2016, 20 (12)
  • [7] Cost-effective rapid prototyping and assembly of poly(methyl methacrylate) microfluidic devices
    Carlos Matellan
    Armando E. del Río Hernández
    [J]. Scientific Reports, 8
  • [8] Safe and cost-effective rapid-prototyping of multilayer PMMA microfluidic devices
    Antonio Liga
    Jonathan A. S. Morton
    Maïwenn Kersaudy-Kerhoas
    [J]. Microfluidics and Nanofluidics, 2016, 20
  • [9] Cost-effective rapid prototyping and assembly of poly(methyl methacrylate) microfluidic devices
    Matellan, Carlos
    Hernandez, Armando E. del Rio
    [J]. SCIENTIFIC REPORTS, 2018, 8
  • [10] Investigation of the maskless lithography technique for the rapid and cost-effective prototyping of microfluidic devices in laboratories
    Xiang, Nan
    Yi, Hong
    Chen, Ke
    Wang, Shanfang
    Ni, Zhonghua
    [J]. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2013, 23 (02)