ELECTRIC RESISTIVE HEAT CURING OF THE FIBER-MATRIX INTERPHASE IN GRAPHITE EPOXY COMPOSITES

被引:10
|
作者
SANCAKTAR, E
MA, WJ
YURGARTIS, SW
机构
[1] Department of Mechanical and Aeronautical Engineering, Clarkson University, Potsdam, NY
关键词
D O I
10.1115/1.2919324
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A novel method for tailoring the interphase of carbon fiber-polymer composites by resistive electric heating is presented. The single fiber-epoxy resin tensile test is used to investigate the adhesion and fracture properties of the interphase. Electric resistive heating is shown to increase adhesion and toughness at the interphase region. In analyzing the results, the strength and fracture energy of the interphase are related to the thermal postcure conditions created by resistive electric heating. For this purpose, difference analysis method is used to obtain numerical solution for heat conduction problem in the single fiber test specimen and the temperature distributions are plotted. Improvements obtained using resistive electric heating via carbon fiber are compared with those obtained by postcuring of the whole sample via convective thermal postcuring. The results obtained using these two different postcure methods seem to be similar.
引用
收藏
页码:53 / 60
页数:8
相关论文
共 50 条
  • [1] The effect of curing schedules on fiber-matrix adhesion in carbon fiber-epoxy resin composites
    ElKhoury, Luke
    Berg, John C.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2022, 56 (05) : 699 - 712
  • [2] Aramid fiber reinforced epoxy composites: Fiber-matrix joint
    Milyochin, Yu. M.
    Gusev, S. A.
    Lunkina, G. V.
    Sokolov, V. V.
    Tikhonov, I. V.
    Shchetinin, V. M.
    [J]. THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING, 2016, 50 (05) : 816 - 821
  • [3] Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase - direct observations of the fiber-matrix interphase by SEM and TEM
    Kamae, Toshiya
    Drzal, Lawrence T.
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2024, 185
  • [4] Fatigue behavior of cross-ply glass-fiber epoxy composites including the effect of fiber-matrix interphase
    Gassan, J
    [J]. COMPOSITE INTERFACES, 2000, 7 (04) : 287 - 299
  • [5] FIBER-MATRIX INTERPHASE CHARACTERIZATION IN COMPOSITES USING ULTRASONIC VELOCITY DATA
    CHU, YC
    ROKHLIN, SI
    [J]. JOURNAL OF APPLIED PHYSICS, 1994, 76 (07) : 4121 - 4129
  • [6] INTERPHASE EFFECTS ON FIBER-MATRIX ADHESION
    DRZAL, LT
    RICH, MJ
    LLOYD, PF
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1981, 182 (AUG): : 116 - &
  • [7] FIBER-MATRIX INTERPHASE EFFECTS UPON TRANSVERSE BEHAVIOR IN METAL-MATRIX COMPOSITES
    ROBERTSON, DD
    MALL, S
    [J]. JOURNAL OF COMPOSITES TECHNOLOGY & RESEARCH, 1992, 14 (01): : 3 - 11
  • [8] Cryogenic microcracking of carbon fiber/epoxy composites: Influences of fiber-matrix adhesion
    Timmerman, JF
    Hayes, BS
    Seferis, JC
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2003, 37 (21) : 1939 - 1950
  • [9] Characterization of the fiber-matrix interphase and its influence on mechanical properties of unidirectional composites
    Subramanian, S
    Lesko, JJ
    Reifsnider, KL
    Stinchcomb, WW
    [J]. JOURNAL OF COMPOSITE MATERIALS, 1996, 30 (03) : 309 - 332
  • [10] Reversible and irreversible effects on the epoxy GFRP fiber-matrix interphase due to hydrothermal aging
    Krauklis, Andrey E.
    Starkova, Olesja
    Gibhardt, Dennis
    Kalinka, Gerhard
    Aouissi, Hani Amir
    Burlakovs, Juris
    Sabalina, Alisa
    Fiedler, Bodo
    [J]. COMPOSITES PART C: OPEN ACCESS, 2023, 12