HIGH-VELOCITY OXYFUEL THERMAL SPRAY COATINGS FOR BIOMEDICAL APPLICATIONS

Plasma spraying is used to produce most commercially available bioceramic coatings for dental implants; however, these coatings still contain some inadequacies, Two types of coatings produced by the high-velocity oxyfuel (HVOF) combustion spray process using commercially available hydroxyapatite (HA) and fluorapatite (FA) powders sprayed onto titanium were characterized to determine whether this relatively new coating process can be applied to bioceramic coatings, Diffuse reflectance Fourier transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to characterize the composition, microstructure, and morphology of the coatings, The XRD and FTIR techniques revealed an apatitic structure for both HA and FA coatings, However, XRD patterns indicated some loss in crystallinity of the coatings due to the spraying process, Results from FTIR showed a loss in the intensity of the OH- and F- groups due to HVOF spraying; the phosphate groups, however, were still present, Analysis by SEM showed a coating morphology similar to that obtained with plasma spraying, with complete coverage of the titanium substrate, Interfacial SEM studies revealed an excellent coating-to-substrate apposition. These results indicate that with further optimization the HVOF thermal spray process may offer another method for producing bioceramic coatings.