HELIUM EFFECTS ON THE MICROSTRUCTURAL EVOLUTION OF REACTOR IRRADIATED FERRITIC AND AUSTENITIC STEELS

Microstructural evolution in neutron irradiated austenitic stainless steels and Cr-Mo ferritic steels is reviewed. Important highlights are: (1) there is a strong correlation between precipitation and void evolution in austenitic steels; (2) helium affects precipitate evolution in austenitic steels, but observations indicate no effect on precipitation in ferritic steels; (3) helium has a pronounced effect on the cavity evolution of the two steel types. Helium effects are explained in terms of the interrelationship between microstructural evolution and point-defect annihilation processes. In stainless steel, three relative regimes of microstructural behavior for different helium generation rate-displacement rate ratios are recognized: (1) “low” He/dpa ratio, where helium effects on the radiation-induced microstructural evolution are negligible or develop slowly, (2) “medium’ He/dpa ratio, where helium effects strongly enhance the microstructural changes, and (3) “high” He/dpa ratio, where helium effects are limited to the early development of a high density of fine bubbles which interfere with other radiation-induced microstructural changes, but allow enhanced thermal microstructural evolution to take place instead. The extensive data on austenitic steels fall within these regimes. Ferritic steels are known to be highly resistant to void swelling without helium. It is suggested that enhanced cavity formation due to helium in ferritic steels makes higher swelling a potential concern for fusion reactor applications. © 1990, Taylor & Francis Group, LLC. All rights reserved.