Evaluation of the influence of cutting parameters on surface deformation during a milling process.

被引：0
|
作者：
Maduro, G. [1 ]
Gonzalez, L. [1 ]
Porrello, A. [2 ]
Alfonzo, C. [2 ]
Cabello, S. [2 ]
机构：
[1] Univ Carabobo, Fac Ingn, Escuela Ingn Mecan, Caracas, Venezuela
[2] Univ Carabobo, Fac Ingn, Ctr Invest Mecan, Caracas, Venezuela
来源：
INGENIERIA UC | 2015年 / 22卷 / 01期
关键词：
milling; surface deformation; AISI; 1018;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work the influence of cutting parameters was evaluated over a shoulder milling process on surface deformation in a steel AISI 1018. Twenty-seven (27) machining conditions were studied possible combinations defined by establishing three different values cutting speed and depth of cut and feed. Studied for each condition metallographic preparation it possible to observe and quantify the distorted material thickness by machining and then by analysis of variance was possible to establish the degree of contribution of each parameter on the thickness of material was deformed. Parameter was determined that less significance is the feed and that the greatest contribution is achieved with the combination of the three parameters.
引用
收藏
页码：64 / 72
页数：9
相关论文
共 50 条
  • [1] Influence of Cutting Parameters to Surface Area Roughness in Dimple Machining Using Milling Process
    Hanafiah, M. A.
    Aziz, A. A.
    Yusoff, A. R.
    [J]. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2021, 18 (03) : 9094 - 9100
  • [2] Systematic Evaluation of Influence of Process Parameters on Surface Texture in Flank Milling
    Zhang, Yan
    Wan, Xiao-Jin
    [J]. COMPUTING, CONTROL AND INDUSTRIAL ENGINEERING IV, 2013, 823 : 165 - +
  • [3] Cutting parameters influence on surface roughness in AL 7075 milling
    Kosarac, Aleksandar
    Sikuljak, Lana
    Obradovic, Cedomir
    Mladenovic, Cvijetin
    Zeljkovic, Milan
    [J]. 2020 19TH INTERNATIONAL SYMPOSIUM INFOTEH-JAHORINA (INFOTEH), 2020,
  • [4] Study of the cutting process parameters that influence the surface quality machined by end milling of the aluminum alloy
    Pop, Alina Bianca
    Titu, Aurel Mihail
    [J]. 9TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2019): TRENDS IN NEW INDUSTRIAL REVOLUTION, 2019, 290
  • [5] Influence of the cutting parameters on the workpiece temperature during face milling
    Nowakowski, Lukasz
    Skrzyniarz, Michal
    Miko, Edward
    Takosoglu, Jakub
    Blasiak, Slawomir
    Laski, Pawel
    Bracha, Gabriel
    Pietrala, Dawid
    Zwierzchowski, Jaroslaw
    Blasiak, Malgorzata
    [J]. EXPERIMENTAL FLUID MECHANICS 2016 (EFM16 ), 2017, 143
  • [6] Influence of Technological Parameters on the Cutting Temperature during Trochoidal Milling
    Waszczuk, Kamil Piotr
    [J]. MANUFACTURING TECHNOLOGY, 2024, 24 (01): : 148 - 153
  • [7] Influence of milling process parameters on the surface integrity of CFRP
    Pecat, Oliver
    Rentsch, Ruediger
    Brinksmeier, Ekkard
    [J]. FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 466 - 470
  • [8] Effect of Process Parameters on Cutting Forces and Surface Roughness during Peripheral Up Milling of Bamboo Scrimber
    Wang, Jie
    Cao, Pingxiang
    Guo, Xiaolei
    Xue, Hong
    Jia, Gang
    Wang, Baojin
    [J]. BIORESOURCES, 2015, 10 (04): : 8414 - 8425
  • [9] Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy
    Wang, Guijie
    Liu, Zhanqiang
    Huang, Weimin
    Wang, Bing
    Niu, Jintao
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (5-8): : 2211 - 2221
  • [10] Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy
    Guijie Wang
    Zhanqiang Liu
    Weimin Huang
    Bing Wang
    Jintao Niu
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 102 : 2211 - 2221
12345