Friction stir welding: multi-response optimisation using Taguchi-based GRA

In present experimental work, friction stir welding of aluminium alloy 5083-H321 is performed for optimisation of process parameters for maximum tensile strength. Taguchi's L 9 orthogonal array has been used for three parameters - tool rotational speed (TRS), traverse speed (TS), and tool tilt angle (TTA) with three levels. Multi-response optimisation has been carried out through Taguchi-based grey relational analysis. The grey relational grade has been calculated for all three responses ultimate tensile strength, percentage elongation, and micro-hardness. Analysis of variance is the tool used for obtaining grey relational grade to find out the significant process parameters. TRS and TS are the two most significant parameters which influence most of the quality characteristics of friction stir welded joint. Validation of predicted values done through confirmation experiments at optimum setting shows a good agreement with experimental values.