MECHANICAL AND TRIBOLOGICAL PROPERTIES OF ZINC ALUMINUM METAL-MATRIX COMPOSITES

Recently, commercial Zn-Al foundry alloys such as ZA-27 have found increasing use for many applications and have competed effectively against copper, aluminium and iron-based foundry alloys. However, the elevated temperature ( > 100-degrees-C) properties of zinc aluminium alloys are unsatisfactory and restrict their use in some applications. One viable approach to improving the elevated temperature properties is to reinforce the zinc-aluminium alloys with alumina fibres. In this investigation, the mechanical properties of a Zn-Al alloy reinforced with alumina fibres were evaluated. Tensile, compression and impact properties were determined at 25, 100 and 150-degrees-C. Lubricated wear tests were also performed on the unreinforced alloy and composites. It was found that although fibre reinforcement did result in some improvement of tensile and compression properties at elevated temperatures, the composites had poor toughness and ductility. The presence of a brittle SiO2 layer at the fibre/matrix interfaces resulted in fibre/matrix decohesion under tensile loading, impairing the performance of the reinforced materials. Some improvement in wear resistance was noted for the composite materials but fibre reinforcement did not yield significant improvement in fatigue resistance.