AN INVESTIGATION OF STICK-SLIP FRICTION ON THE CONTOURING ACCURACY OF CNC MACHINE-TOOLS

被引：33
|
作者：
TARNG, YS
CHENG, HE
机构：
[1] Department of Mechanical Engineering, National Taiwan Institute of Technology.
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1995年 / 35卷 / 04期
关键词：
D O I：
10.1016/0890-6955(94)P4350-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Stick-slip friction has a great influence on the contouring accuracy of CNC machine tools. In this paper, a nonlinear model is used to simulate and analyze dynamic behaviors of stick-slip friction on the contouring accuracy of CNC machine tools. A simple control strategy is then developed to tune the control loop gain for reducing the contouring error due to stick-slip friction. Computational simulations and experimental tests are performed to illustrate the proposed method.
引用
收藏
页码：565 / 576
页数：12
相关论文
共 50 条
  • [1] STICK-SLIP AND MACHINE TOOLS
    WOLF, GJ
    [J]. LUBRICATION ENGINEERING, 1965, 21 (07): : 273 - &
  • [2] Stick-slip friction
    Whitby, R. David
    [J]. TRIBOLOGY & LUBRICATION TECHNOLOGY, 2011, 67 (05) : 80 - 80
  • [3] Stick-slip friction
    Hogan, BJ
    [J]. MANUFACTURING ENGINEERING, 2003, 130 (05): : 10 - 10
  • [4] Dynamic Friction Model for the Investigation of Stick-Slip Oscillations
    Wittmaack, Martin
    Andre, Markus
    Schmitz, Katharina
    [J]. CHEMICAL ENGINEERING & TECHNOLOGY, 2023, 46 (01) : 29 - 36
  • [5] Stabilizing Stick-Slip Friction
    Capozza, Rosario
    Rubinstein, Shmuel M.
    Barel, Itay
    Urbakh, Michael
    Fineberg, Jay
    [J]. PHYSICAL REVIEW LETTERS, 2011, 107 (02)
  • [6] Inverted stick-slip friction
    Richetti, P
    Drummond, C
    Israelachvili, J
    In, M
    Zana, R
    [J]. EUROPHYSICS LETTERS, 2001, 55 (05): : 653 - 659
  • [7] MECHANOELECTRONIC TRANSDUCER SYSTEM FOR RECORDING FRICTION WITH A STICK-SLIP MACHINE
    BOWERS, RC
    CLINTON, WC
    [J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 1954, 25 (10): : 1037 - 1038
  • [8] A METHOD FOR ENHANCING THE ACCURACY OF CNC MACHINE-TOOLS FOR ON-MACHINE INSPECTION
    MOU, J
    LIU, CR
    [J]. JOURNAL OF MANUFACTURING SYSTEMS, 1992, 11 (04) : 229 - 237
  • [9] Analysis of the critical Stick-slip velocity of CNC machine tool combining friction parameters identification and dynamic model
    Yang, Jianzhong
    Zhou, Hao
    Li, Shuo
    Chen, Jihong
    Xiang, Hua
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (3-4): : 1849 - 1865
  • [10] Investigation on bit stick-slip vibration with random friction coefficients
    Qiu, Hongyuan
    Yang, Jianming
    Butt, Stephen
    [J]. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2018, 164 : 127 - 139
12345