INVESTIGATION ON BRAZING INTERFACE BONDING CHARACTERISTIC OF AA7075 AND AA6061 ALUMINUM ALLOY WITH AR500 STEEL USING Al-Si-Zn FILLER METAL

被引：0

作者：

Muhamed, M. N. ^{[1
,2
]}

Omar, M. Z. ^{[1
,3
]}

Abdullah, S. ^{[1
,3
]}

Sajuri, Z. ^{[1
,3
]}

Zamri, W. F. H. ^{[1
,3
]}

Rahman, M. A. I. A. ^{[1
]}

Abdullah, M. F. ^{[1
]}

机构：

[1] Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Mech & Mat Engn, Ukm Bangi 43600, Selangor, Malaysia

[2] TATI Univ Coll, Fac Mfg Engn Technol, Telok Kalong 24000, Kemaman Terengg, Malaysia

[3] Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Ctr Automot Res, Ukm Bangi 43600, Selangor Darul, Malaysia

来源：

JURNAL TEKNOLOGI | 2016年 / 78卷 / 6-9期

关键词：

Dissimilar metal; brazing; intermetallic compound; shear strength; filler metal;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents the study on interface bonding characteristic of AA7075 and AA6061 aluminum alloy with AR500 steel by torch brazing bonding process. The weight reduction in vehicles component is required for energy saving in the automobile industry. Lightweight metals such as aluminum joining with other metal especially with steel, have started replaced steel parts in automobile structures but the effect of intermetallic compound (IMC) layer formation have limited the application in this industry due to strength matter. The torch brazing method was done to join the dissimilar metal with Al-Si-Zn base filler metal for the process. The shear strength of the AA6061/AR500 joint was higher than the AA7075/AR500 joint when the joining conditions were the same. The IMC formation was observed at the joint interface, and the joints mainly fractured at this region.

引用

页码：129 / 135

页数：7

共 17 条

[1] A Study on the Wetting Behaviour of Al-Si-Zn Brazing Filler on AA7075 and AR500 Surface
Muhamed, Mohd Najib
Omar, Mohd Zaidi
Abdullah, Shahrum
Sajuri, Zainuddin
Zamri, Wan Fathul Hakim Wan
Selamat, Zainal Ariffin
[J]. JURNAL KEJURUTERAAN, 2020, 32 (01): : 113 - 119
[2] Brazed Joint Interface Bonding Strength of AR500 Steel and AA7075 Aluminium Alloy
Muhamed, Mohd Najib
Omar, Mohd Zaidi
Abdullah, Shahrum
Sajuri, Zainuddin
Zamri, Wan Fathul Hakim Wan
Abdullah, Mohd Faizal
[J]. METALS, 2018, 8 (09):
[3] The Effect of Sr composition on the microstructure and mechanical properties of Al-Si-Zn filler for the brazing of AA6061
Wang, Guangyu
Ma, Rui
Wan, Mingpan
Zhao, Fei
[J]. MATERIALS RESEARCH EXPRESS, 2022, 9 (02)
[4] Microstructure and Properties of 6061 Aluminum Alloy Brazing Joint with Al-Si-Zn Filler Metal
Dai, Wei
Xue, Songbai
Lou, Jiyuan
Wang, Shuiqing
[J]. MATERIALS TRANSACTIONS, 2012, 53 (09) : 1638 - 1643
[5] Brazing 6061 aluminum alloy with Al-Si-Zn filler metals containing Sr
Wei Dai
Song-bai Xue
Feng Ji
Jiang Lou
Bo Sun
Shui-qing Wang
[J]. International Journal of Minerals,Metallurgy and Materials, 2013, 20 (04) : 365 - 370
[6] Brazing 6061 aluminum alloy with Al-Si-Zn filler metals containing Sr
Dai, Wei
Xue, Song-bai
Ji, Feng
Lou, Jiang
Sun, Bo
Wang, Shui-qing
[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2013, 20 (04) : 365 - 370
[7] Brazing 6061 aluminum alloy with Al-Si-Zn filler metals containing Sr
Wei Dai
Song-bai Xue
Feng Ji
Jiang Lou
Bo Sun
Shui-qing Wang
[J]. International Journal of Minerals, Metallurgy, and Materials, 2013, 20 : 365 - 370
[8] Brazing of 6061 aluminum alloy with the novel Al-Si-Ge-Zn filler metal
Niu, Zhiwei
Huang, Jihua
Liu, Kaikai
Xu, Fangzhao
Chen, Shuhai
Zhao, Xingke
[J]. MATERIALS LETTERS, 2016, 179 : 47 - 51
[9] Oxidation Effect on Welded AA6061 Al Alloy Using ER4043 Filler Metal
Azida, C. L. Nur
Jalar, A.
Othman, N. K.
Daud, A. R.
[J]. MECHANICAL, MATERIALS AND MANUFACTURING ENGINEERING, PTS 1-3, 2011, 66-68 : 46 - 49
[10] Oxidation Effect of Welded AA6061 Al Alloy Using ER5356 Filler Metal
Azida, C. L. Nur
Jalar, A.
Othman, N. K.
Daud, A. R.
[J]. MECHANICAL, MATERIALS AND MANUFACTURING ENGINEERING, PTS 1-3, 2011, 66-68 : 42 - 45

← 1 2 →