COMPUTERIZED SIMULATION OF TRANSMISSION ERRORS AND SHIFT OF BEARING CONTACT FOR FACE-MILLED HYPOID GEAR DRIVE

被引：23
|
作者：
LITVIN, FL
CHEN, JS
SEP, TM
WANG, JC
机构：
[1] University of Illinois at Chicago, Chicago, IL
[2] Ford Motor Co, Sterling Heights, MI
来源：
JOURNAL OF MECHANICAL DESIGN | 1995年 / 117卷 / 02期
关键词：
D O I：
10.1115/1.2826133
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A computerized investigation of the influence of alignment errors on the transmission errors and the shift of the bearing contact is performed. The investigation is performed for an imaginary hypoid gear drive with conjugate tooth surfaces. The transmission error functions caused by misalignment are shown to be periodic discontinuous almost linear functions with the frequency of the cycle of meshing. The above functions can be totally absorbed by a predesigned parabolic function. The shift of the bearing contact caused by misalignment has been determined as well. The investigation is based on computerized simulation of meshing and contact of gear tooth surfaces. The machine-tool settings for the generation of the designed gear drive have been determined. A numerical example that illustrates the developed theory is given.
引用
收藏
页码：262 / 268
页数：7
相关论文
共 42 条
  • [1] Computerized simulation of transmission errors and shift of bearing contact for face-milled hypoid gear drive
    Univ of Illinois at Chicago, Chicago, United States
    J Mech Des, Trans ASME, 2 A (262-268):
  • [2] Investigation on contact and bending stress of face-hobbed and face-milled hypoid gear
    Liu, Siyuan
    Song, Chaosheng
    Zhu, Caichao
    Liang, Chengcheng
    Bai, Huan
    MECHANISM AND MACHINE THEORY, 2020, 150
  • [3] COMPUTERIZED INSPECTION OF HYPOID PINION FACE-MILLED TOOTH SURFACES
    LITVIN, FL
    KUAN, CP
    ZHANG, Y
    MASSETH, J
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1992, 32 (06): : 869 - 884
  • [4] An exact system of generation for face-milled hypoid gears with uniform depth taper: Application to hypoid gear drives with high gear ratio
    Gonzalez-Perez, Ignacio
    Fuentes-Aznar, Alfonso
    MECHANISM AND MACHINE THEORY, 2024, 196
  • [5] Pinion development of face-milled spiral bevel and hypoid gears based on contact attributes
    Yang, Yu
    Mao, Shimin
    Guo, Wenchao
    Kuang, Yuhua
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 84 (9-12): : 2347 - 2356
  • [6] Pinion development of face-milled spiral bevel and hypoid gears based on contact attributes
    Yu Yang
    Shimin Mao
    Wenchao Guo
    Yuhua Kuang
    The International Journal of Advanced Manufacturing Technology, 2016, 84 : 2347 - 2356
  • [7] Computerized determination of the qualified region of main design parameters of face-milled hypoid gears with low shaft angle
    Liu, Siyuan
    Zhu, Caichao
    Fuentes-Aznar, Alfonso
    Song, Chaosheng
    MECHANISM AND MACHINE THEORY, 2021, 159
  • [8] Computerized design and generation of modified spiroid worm-gear drive with low transmission errors and stabilized bearing contact
    Litvin, FL
    De Donno, M
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 1998, 162 (1-4) : 187 - 201
  • [9] Computerized design and analysis of face-milled, uniform tooth height spiral bevel gear drives
    Litvin, FL
    Wang, AG
    Handschuh, RF
    JOURNAL OF MECHANICAL DESIGN, 1996, 118 (04) : 573 - 579
  • [10] Computerized design, simulation of meshing, and contact and stress analysis of face-milled formate generated spiral bevel gears
    Litvin, FL
    Fuentes, A
    Fan, Q
    Handschuh, RF
    MECHANISM AND MACHINE THEORY, 2002, 37 (05) : 441 - 459
12345